|
|||||||
| Power and lighting expansion units | PXM-1 | PXM-2 | HPH-4 | HPH-8 | |||
| Power expansion and lighting expansion | Yes | Yes | Yes | Yes | |||
| Pre-wired, easy installation | Yes | Yes | |||||
| Circuit breaker protected | Yes | Yes | |||||
| Universal 120 / 240 receptacles | Yes | Yes | |||||
| 120 volt (Nema 5-15) receptacles | Yes | ||||||
| 240 volt (Nema 6-15) receptacles | Yes | ||||||
| Controls up to 1200 watts / 2 receptacles | Yes | ||||||
| Controls up to 2000 watts / 2 receptacles | Yes | ||||||
| Controls up to 4000 watts / 4 receptacles | Yes | ||||||
| Controls up to 8000 watts / 8 receptacles | Yes | ||||||
| 120 volt trigger cable | Yes | Yes | Yes | Yes | |||
| Aluminum heat-sink enclosure | Yes | Yes | |||||
| 3-year warranty | Yes | Yes | Yes | Yes | |||
| *The PXM-1 and PXM-2 come pre-wired with a 15-amp power cable and require no wiring. *The HPH-4 and HPH-8 comes with pre-wired universal receptacles, but a main power source must be installed by a qualified person. Normally a 30-amp @ 240 volt power circuit is run into the HPH-4, while the HPH-8 requires a 50-amp @ 240 volt power circuit connected to it. | |||||||