|
Not sure what size generator you need? How much CO2 does your growing area require?
Need More Info?
 VCG CO2 Generator Selector Chart
VCG-6 & VCG-27 CO2 Dosage Calculator Excel Spreadsheet
CO2 Regulator Settings Excel Spreadsheet
VCG CO2 Generator Troubleshooting Guide
Tips for using CO2
|
|
|
CO2 Equipment
Carbon Dioxide / CO2 is critical for all plants. Normal atmospheric air around the world averages about 380 PPM (Parts Per Million). When plants are provided higher levels of carbon dioxide, they can grow faster and larger. It is usually agreed by experts that 1500 PPM is beneficial to plants. Gas burning CO2 generators are the most effective way of producing CO2.
The VCG-27 and VCG-6 are the safest and most advanced CO2 generators available today
VCG-27 Variable CO2 Generator
-
Available in both Propane and Natural Gas
-
Variable CO2 output from 6 to 27 cubic foot CO2 / Hr.
-
Solid state electronic ignition control module eliminates the open pilot flame
-
Tip-over switch shuts off the gas flow in the event the unit falls or tips over
-
Unit comes standard with 10 brass burners pre-installed
-
The burners are designed to burn clean and produce consistent blue flames
-
Dual redundant low-voltage solenoid valves add a second layer of safety
-
Comes complete with 12 foot hose and pressure regulator
|
VCG-6 Variable CO2 Generator
|
-
Available in both Propane and Natural Gas
-
Variable CO2 output from 3 to 6 cubic foot CO2 / Hr.
-
Solid state electronic ignition control module eliminates the open pilot flame
-
Tip-over switch shuts off the gas flow in the event the unit falls or tips over
-
Unit comes standard with 2 brass burners pre-installed
-
The burners are designed to burn clean and produce consistent blue flames
-
Dual redundant low-voltage solenoid valves add a second layer of safety
-
Comes complete with 12 foot hose and pressure regulator
|
Regulator connects to 20 lb or 50 lb CO2 tanks
-
Controls the flow of CO2 and regulates the amount of CO2 with a precision flow gauge that can be set from 1/2 to 15 SCFH (standard cubic feet per hour)
-
Easy to read and understand Color Coded pressure gauge
-
The 120 volt solenoid is pre-wired with a 6ft power cord to connect to a controller or timer.
-
When used with the optional CO2 EXP
more than 1 tank can be coupled together to extend the time between tank changes
CO2-EXP CO2 Regulator Expansion
-
Connect CO2-EXP to another 20 lb or 50 lb CO2 tank and to the CO2-REG
-
The precision flow gauge on the CO2-REG releases between 1/2 to 15 SCFH (standard cubic feet per hour) of CO2 per hour from the connected tanks
-
Multiple tanks can be connected
|
|
|
|
|
